테슬라용 휴대용 에어 컴프레서 및 타이어 밸브 캡 콤보
테슬라용 휴대용 에어 컴프레서
- 60W 고속 충전: 60W 고속 에어 컴프레서로 충전 경험을 혁신하세요. 포함된 USB-C 케이블로 단 30분 만에 완충을 달성하며, 표준 모델보다 최대 여섯 배 빠른 효율을 제공합니다.
빠른 주입, 최적의 성능
- 컴프레서로 인플레이션 성능이 50% 향상됩니다. 이제 테슬라 소유자들은 평소의 절반 시간에 타이어를 주입할 수 있어 효율성이 향상됩니다.
강력한 합금 주조 실린더
- 전기차(EV)에 특별히 맞춤 제작된 강력한 합금 주조 실린더는 높은 타이어 압력을 자신 있게 처리하여 신뢰성과 내구성을 보장합니다.
대형 화면 디스플레이
- 저희의 대형 화면 디자인은 직관적인 인터페이스를 제공하여 모든 기능을 명확하게 표시함으로써 사용자 친화적인 조작과 모니터링을 가능하게 합니다.
모든 요구를 충족시키는 다양한 액세서리
- 이 포괄적인 패키지에는 충격 방지 보관 케이스, 바늘 밸브 어댑터, 프레스타 밸브 어댑터, 그리고 타입-C 케이블이 포함되어 있어 어떤 상황에서도 준비될 수 있도록 합니다.
⚠️ 안전 주의사항:
- 공기 주입 중에는 고압 작동으로 인해 공기 호스가 뜨거워질 수 있습니다. 화상을 피하기 위해 주의해서 다루십시오.
- 과열을 방지하기 위해 5분을 초과하여 연속 작동하지 마십시오. 공기 압축기와 호스가 식을 때까지 기다린 후 다루십시오.
타이어 밸브 캡 (4개 세트)
- 밀폐형 누수 방지: 저희 캡은 통합된 고무 씰을 특징으로 하여 밀폐형, 누수 방지, 먼지 방지 보호를 제공합니다.
- 복합 재료, 밸브 바디 보호: 내장된 절연 재료가 밸브를 먼지, 부식, 혹독한 날씨로부터 보호합니다.
- 내구성과 먼지 방지를 위한 고품질 재료: 아연 합금으로 제작된 이 캡들은 탁월한 강도와 먼지 방지 내구성을 제공합니다.
- 손쉬운 조작 및 설치: 육각 디자인은 설치 및 제거를 쉽게 해주어 이 캡들을 사용자 친화적이고 실용적으로 만듭니다.
패키지 구성
- 휴대용 에어 컴프레서 x1
- 보관 가방 x1
- 니들 밸브 어댑터 x1
- 프레스타 밸브 어댑터 x1
- 타입-C 케이블 x1
- 사용자 매뉴얼
FAQ 확인하기: 이 필수 테슬라 액세서리에 대해 더 알아보고 더 효율적이고 편리한 운전 경험으로의 첫걸음을 내딛으세요. 여기를 클릭하세요 > 테슬라용 휴대용 에어 컴프레서 FAQ.
옵션 선택
Convenient and reliable
I’ve been able to inflate 6 very low pressure tires with a not fully charged battery. Very impressed.
(On the “cons” side: a bit too noisy…)
I had a slow leak in one of my tires. It was not easy to find a place to fill up the tires, other than driving over to Costco (free fill up for members) or pay $2.00 at a gas station. Of course, if you are not neither either, you are SOL. I researched and found this air compressor. It was easy to order, arrived fairly quickly (it shipped from Taiwan) and worked great both on my Tesla and my husband's Honda Odyssey. It is compact and fits easy in my trunk.
Way better than the one I bought at my local supermarket.
Very satisfied with the inflating speed and the different inflating mode, I use it for both my car and my bike
All New Tire Inflating Experience
High-efficient Inflation │ Design for Evs
60W High-speed Charging
Support fast charging in just 30 minutes for a full charge. Save up to 6 times of the waiting time compare to others.
Fast Inflation & Optimum Performance
Enhanced inflation performance up to 50%, taking only half the time to inflate.
Alloy Die-cast Cylinder
No need to fear of high pressure loading with our powerful cylinder. Design for EV with high tire pressure requirements.
Fast Charge Fast Inflation Powerful Cylinder
60W High-speed Charging │Powered up, ready to go!
・Built-in lithium-ion battery. No need for
external power source,
go completely wireless.
・Support up to 60W fast charging and 30 min to
full power.
Save up to 6 times of the waiting
time compare to others.
・Type-C universal charging port is highly
compatible and convenient.
Note: The Jowua air pump supports 5-20V⎓3A (maximum 60W) fast charging. The battery charging time is dynamically adjusted based on the efficiency of the power supply. All data on this page have been tested under specific conditions, actual use may differ due to varying environments.
Powerful Motor
Optimum Performance
Reduce Inflation Time In Half !
Adopt high-speed permanent magnet motor with a 22mm high-precision alloy die-cast cylinder. It takes less than a minute* to refill a high-pressure tire.
Note: The inflated item is a 235/40 R19 car tire, inflated from 38 to 42 psi pressure approximately 55s.
This data is tested under specific conditions, due to different environments, the actual use process may be slightly different.
During the inflation process, high pressure operation may cause physical heating. Please do not use it continuously for more
than 5 minutes, and wait until it has cooled down. Be cautious when removing the air hose to prevent burns!
Electric Vehicles VS Traditional Car Tire
The maximum pressure for regular tire is the minimum for EVs
Electric vehicles are heavier than traditional vehicles due to their batteries and reinforced body structure. EVs require relatively high tire pressure to bear the weight. Take most of the Tesla models as example, the required tire pressure standard is 42psi/2.9bar, which is much higher than the traditional tire standard of 36psi/2.5bar.
Tire Pressure Requirment
Traditional 36psi /2.5bar
EV 42psi / 2.9bar
Inflation Time Comparison (from 32 to 42 PSI)
・Regular portable air pumps cannot handle the high pressure loading of electric vehicles due to the small-diameter cylinder design. Excessive pressure loading results in reduced efficiency and serious power consumption.
・Jowua adopts a large-diameter alloy die-cast. It is specifically designed to meet the high tire-pressure requirement of electric vehicles.
Electric Vehicles Mode
42 PSI by default. Press to inflate and automatically stops when the pre-set pressure is reached.
Effective Heat Dissipation
Multi-blade fans and cooling vent design for better air circulation and heat dissipation.
30 cm Extended Air Hose
Extended nylon-braided air hose, easily inflate from multiple angles.
Built-in LED Light
Easy to use in the dark ,
and long press for emergency SOS flashing.
Shockproof Case
Comes with a variety of adapters and accessories to meet all your needs.
Quick Connect Valve Adapter
Press to lock, pull to open,
fast and easy. Eliminating the time of tightening the air valve.
Large Screen Display
Display all features at once. Easy to read and operate.
Jowua Shockproof Storage Case
Easily store it on the side of the rear trunk.
Comes with a variety of adapters and accessories to meet all your needs.
Presta valve adapter
Ventil Adapter Set
Type-C charging cable
Storage Case
Low Tire Pressure?
Out of Battery Again?
Support Fast Charge & Quick Inflation Helps you get back on the road faster than ever.
Power up in a hurry
12 minutes 60W fast charging
Super-fast Inflation
Fully inflate all four tires from
38 to 42 psi within 6 minutes.
Note: This data is tested under specific conditions, due todifferent environments, the actual use process may beslightly different.
Note: During the inflation process, high pressure operationmay cause physical heating. Please do not use it continuouslyfor more than 5 minutes, and wait until it has cooled down.Be cautious when removing the air hose to prevent burns!
獨家設計 專為Model 3 & Y 量身打造
有兩種不同的頭枕造型
Model 3
頭枕上有兩縫線
Model Y
頭枕表面無縫線
Tire Valve Caps (Set of 4)
Durable Material
Dust Resistance
Easy
Installaion
Set of 4
Supreme Quality|Selected Material
High-Quality
Materials for Durability
and Dust Resistance
Crafted from zinc alloy for exceptional
strength, dustproof durability.
Integrated Rubber Design
Rubber seal for airtight, leak-proof,
and dust-resistant performance.
Composite Protection
Built-in insulation materials safeguard
your valves from dirt, corrosion, and harsh weather conditions.
Installation Guide
Step 1
Uncrew the original car valve and clean the valve core
Step 2
Align the JOWUA tire valve
Notice
Due to the built-in rubber of the valve caps, it's advised not to over-tighten during locking to avoid complications. And caused by weather-induced expansion and contraction of the valve.
Dedicated Design
Perfectly Match with Tesla
Hexagonal Shape Design
Easy installation and convenient removal.
Always effortless and user-friendly.
Let customers speak for us
from 226 reviewsYou can find out if you use it.
There is no other alternative
Great items! Works perfectly with Model 3 Highland
Jowua Magsafe holder works really well for me. Best holder you can get for your Tesla Model Y.
Easy to use and so convenient!
It fits well into the car's ambience.
And it works well.
Well worth price. Works great
This is a simple and useful addition to your Tesla to contribute to the back seat passenger experience.
Like the roof sunshade, it fits perfectly and lets me keep the car cool when parked in the open for a full day. Allows me to reduce cabin cooling energy used as well.
I love this controller because of its wireless charging function. You just put it on the charge pad where you normally put your iPhone and this thing charges pretty quick. It is an upgrade to the ones that don’t do that where you need to keep it plugged into a USB port Thank you so much for making such a great item.
Works well, I use it on auto mode for a month now, didn't recharge the battery yet.
Cool add-on in my car especially with the dark winter we have here up north.
I had just been driving my cybertruck for a week when I witnessed one of the worst accidents in my life, I'm so thankful everyone survived!!! The investigator called me the next day and asked if I had video of the accident, unfortunately all I had was the memory card provided by Tesla. The next day I ordered this 1 terabyte card knowing this could mean savings to someone in the future!!!
I installed the Jowua USB Hub Bar Mini in my Tesla Model Y because my wife likes to hold her phone and text to her emplyees while I drive, and she prefers to have easy access to a USB outlet, and this hub meets all of her needs.
What's realy cool about it is that it LOOKS like it was made by Tesla, and was simple to insltall/; the color, shape, finish all look OEM, and I installed it with no tools. it slides right into the center console and is powered with a discreet wire that plugs into the USB C outlet inside the console.
Buy one. You'll be happy you did.
Produit de qualité, très bien adapté pour le modèle Y de Berlin 2024.
Matches car style. Great quality. Fast shipping A+++++
These storage boxes are basically transformers. They stow away very easy, and when you need them they expand into a rigid box! I’m able to put things like snacks and beverages for trips in them with easy side access, so I don’t have to unpack everything. It’s also good for not letting fruit or bread get squashed. Another well designed product with many uses from Jowua!
Fast & Free delivery worldwide
Free delivery on orders over USD$120.
Orders are shipped at J+1 or J+2.
Satisfied or refunded
Satisfaction first! Return or exchange your Jowua purchase within 30 days.
Multi-Lingual Support
Support available through our WhatsApp chat or via email.
Secure payments
Certificate (SSL, AES-256, and PayPal). Your information is secure.