100W 휴대용 공기 압축기 + 충전 솔루션 키트
공기 압축기를 위한 필수 충전 키트 - 집이나 차에서 고효율 충전으로 항상 전력을 공급하세요!
휴대용 공기 압축기
테슬라용 휴대용 공기 압축기
- 100W 고속 충전: 100W 고속 충전 공기 압축기로 충전 경험을 혁신하세요. 포함된 USB-C 케이블로 단 30분 만에 완전 충전을 달성하여 표준 모델보다 최대 6배 더 빠른 효율성을 제공합니다.
빠른 팽창, 최적의 성능
- 당사의 에어 컴프레서로 50% 향상된 공기 주입 성능을 경험하세요. 이제 평소보다 절반의 시간 안에 타이어에 공기를 주입할 수 있어 테슬라 소유자의 효율성을 향상할 수 있습니다.
강력한 합금 주조 실린더
- 전기 자동차(EV)에 맞게 특별히 제작된 견고한 합금 주조 실린더는 높은 타이어 압력을 안정적으로 처리하여 신뢰성과 내구성을 보장합니다.
대형 화면 디스플레이
- 대형 화면 디자인으로 직관적인 인터페이스를 제공하여 사용자 친화적으로 작동하고 모니터링할 수 있도록 모든 기능을 명확하게 표시합니다.
모든 것을 충족하는 다양한 액세서리
- 이 포괄적인 패키지에는 충격 방지 보관 케이스, 니들 밸브 어댑터, 프레스타 밸브 어댑터, Type-C 케이블이 포함되어 있어 어떤 상황에도 대비할 수 있습니다.
⚠️ 안전 참고 사항:
- 팽창하는 동안 고압 작동으로 인해 공기 호스가 뜨거워질 수 있습니다. 화상을 입지 않도록 주의해서 다루십시오.
- 과열을 방지하기 위해 5분 이상 연속 작동을 피하십시오. 취급하기 전에 공기 압축기와 호스가 식었는지 확인하십시오.
타이어 밸브 캡(4개 세트)
- 기밀 누출 방지: 당사 캡에는 통합 고무 씰이 있어 기밀성, 누수 방지, 먼지 차단 기능이 뛰어납니다.
- 복합소재, 밸브 바디를 보호하세요: 내장된 단열재가 밸브를 먼지, 부식 및 혹독한 기상 조건으로부터 보호합니다.
- 내구성과 방진성을 위한 고품질 소재: 아연 합금으로 제작된 이 캡은 뛰어난 강도와 방진 내구성을 제공합니다.
- 간편한 취급 및 설치: 육각형 디자인으로 설치와 제거가 쉬워 사용하기 편리하고 실용적인 캡입니다.
100W 자동차 충전기
테슬라 및 기타 차량을 위한 100W 강력한 충전 그만큼
두 대의 기기를 동시에 충전하세요 USB-C PD 3.0 및 USB-A QC 3.0 포트를 사용하면 속도나 효율성을 희생하지 않고도 두 대의 기기를 동시에 편리하게 충전할 수 있습니다. 여행 내내 휴대전화, 태블릿 또는 노트북을 항상 전원 상태로 유지하세요.
첨단 다층 안전 시스템
세련되고 컴팩트한 디자인 충전기의 컴팩트한 크기, 무광 마감, 우아한 디자인은 Tesla의 인테리어와 완벽하게 통합됩니다. 또한
투기
입력: 12V - 24V
산출:
- 타입-C: 5V/5A, 9V/5A, 12V/5A, 15V/5, 20V/5A
- USB-A: 5V/3A, 9V/2A, 12V/1.5A
- Type-C + USB-A: 총 출력: 45W + 18W
패키지 포함 사항
- 휴대용 공기 압축기 x1
- 보관가방 x1
- 니들 밸브 어댑터 x1
- 프레스타 밸브 어댑터 x1
- Type-C 케이블 x1
- 사용자 설명서
- 100W 자동차 충전기 x1
- 타이어 밸브 캡 x4
FAQ 확인
이 필수 테슬라 액세서리에 대해 자세히 알아보고 더욱 효율적이고 편리한 운전 경험을 위한 첫걸음을 내딛으세요. 여기를 클릭하세요 > 테슬라용 휴대용 공기 압축기 FAQ.
옵션 선택
Let customers speak for us
싸구려같지 않고 고급스러워요
마이크랑 저장usb 동시에 연결하려고 샀어요
I was honestly surprised an adapter like this could support such an amazing charge rate. It was able to fully charge my daughter‘s notbook in record time!
Very good quality and compact joysticks 🕹️. Wireless charging… material and color matching with dashboard.
Satisfied !!!
Greetings from Norway 🇳🇴. ☔️🇳🇴☔️ Satisfied with quality and color matching with my refreshed Tesla Model 3. I love as well how the umbrellas sits on the Jowua flor liners.
Thanks for delivering quality products.
Daniel
My son loves it.
Solid design, easy to pair.
Recommended.
Perfect fit, easy to install; the matte version better than other brands with less glare, less finger prints.
j avais le modèle précédent et celui est plus pratique , la ventouse évite de décoller ensuite le support quand on change de voiture !!!
I have already noticed a difference in how hot my model 3 gets and it isn’t even summer yet. Recommended.
Very easy to use! Perfect for eating or working inside the car! The tray fits perfectly in the back seat as well. A must buy for every Tesla owners!
Great quality and fitting!
Controllers are top notch and always work when you need them to. I haven’t. Had one single issue from them. I own a model 3 2025
The most suitable mats for my Tesla car. No more dirt remains next to the old mats.
I love this neck pillow so much, not only it’s comfortable but also it makes me feel relaxing when I drive. It’s worth to get one if you need to drive car every day.
This is the best accesory for dashcam users. No need to fix it in the window.
Excellent product and extremely fast shipping. Great communication as well.
All New Tire Inflating Experience
High-efficient Inflation │ Design for Evs
100W High-speed Charging
Support fast charging in just 30 minutes for a full charge. Save up to 6 times of the waiting time compare to others.
Fast Inflation & Optimum Performance
Enhanced inflation performance up to 50%, taking only half the time to inflate.
Alloy Die-cast Cylinder
No need to fear of high pressure loading with our powerful cylinder. Design for EV with high tire pressure requirements.
100W High-speed Charging │Powered up, ready to go!
・Built-in lithium-ion battery. No need for
external power source,
go completely wireless.
・Support up to 100W fast charging and 30 min to
full power.
Save up to 6 times of the waiting
time compare to others.
・Type-C universal charging port is highly
compatible and convenient.
Note: The Jowua air pump supports 5-20V/5A (100W Max) fast charging. The battery charging time is dynamically adjusted based on the efficiency of the power supply. All data on this page have been tested under specific conditions, actual use may differ due to varying environments.
Powerful Motor
Optimum Performance
Reduce Inflation Time In Half !
Adopt high-speed permanent magnet motor with a 22mm high-precision alloy die-cast cylinder. It takes less than a minute* to refill a high-pressure tire.
Note: The inflated item is a 235/40 R19 car tire, inflated from 38 to 42 psi pressure approximately 55s.
This data is tested under specific conditions, due to different environments, the actual use process may be slightly different.
During the inflation process, high pressure operation may cause physical heating. Please do not use it continuously for more
than 5 minutes, and wait until it has cooled down. Be cautious when removing the air hose to prevent burns!
Electric Vehicles VS Traditional Car Tire
The maximum pressure for regular tire is the minimum for EVs
Electric vehicles are heavier than traditional vehicles due to their batteries and reinforced body structure. EVs require relatively high tire pressure to bear the weight. Take most of the Tesla models as example, the required tire pressure standard is 42psi/2.9bar, which is much higher than the traditional tire standard of 36psi/2.5bar.
Tire Pressure Requirment
Traditional 36psi /2.5bar
EV 42psi / 2.9bar
Inflation Time Comparison (from 32 to 42 PSI)
・Regular portable air pumps cannot handle the high pressure loading of electric vehicles due to the small-diameter cylinder design. Excessive pressure loading results in reduced efficiency and serious power consumption.
・Jowua adopts a large-diameter alloy die-cast. It is specifically designed to meet the high tire-pressure requirement of electric vehicles.
Electric Vehicles Mode
42 PSI by default. Press to inflate and automatically stops when the pre-set pressure is reached.
Effective Heat Dissipation
Multi-blade fans and cooling vent design for better air circulation and heat dissipation.
30 cm Extended Air Hose
Extended nylon-braided air hose, easily inflate from multiple angles.
Built-in LED Light
Easy to use in the dark ,
and long press for emergency SOS flashing.
Shockproof Case
Comes with a variety of adapters and accessories to meet all your needs.
Quick Connect Valve Adapter
Press to lock, pull to open,
fast and easy. Eliminating the time of tightening the air valve.
Large Screen Display
Display all features at once. Easy to read and operate.
Jowua Shockproof Storage Case
Easily store it on the side of the rear trunk.
Comes with a variety of adapters and accessories to meet all your needs.
Presta valve adapter
Ventil Adapter Set
Type-C charging cable
Storage Case
Tire pressure is low and the compressor is dead.
Just 12 minutes and you're on your way
Charge in 7 mins｜Pump in 5 mins
Leading the way and going above and beyond
＊Please use 100W charging equipment.
＊In order to maintain the best condition, if the pump has not been used for a long time, it will be charged at a slow trickle rate to protect the battery when it is recharged.
Tire Valve Caps (Set of 4)
Durable Material
Dust Resistance
Easy
Installaion
Set of 4
Supreme Quality｜Selected Material
High-Quality
Materials for Durability
and Dust Resistance
Crafted from zinc alloy for exceptional
strength, dustproof durability.
Integrated Rubber Design
Rubber seal for airtight, leak-proof,
and dust-resistant performance.
Composite Protection
Built-in insulation materials safeguard
your valves from dirt, corrosion, and harsh weather conditions.
Installation Guide
Step 1
Uncrew the original car valve and clean the valve core
Step 2
Align the JOWUA tire valve
Notice
Due to the built-in rubber of the valve caps, it's advised not to over-tighten during locking to avoid complications. And caused by weather-induced expansion and contraction of the valve.
Dedicated Design
Perfectly Match with Tesla
Hexagonal Shape Design
Easy installation and convenient removal.
Always effortless and user-friendly.
Elegant Design
Matte finish to fit with Tesla interior
100W Powerful Car Charger
*Work with Varieties of Vehicles from 12V to 24V
Dual Port Output
Support PD 3.0 & QC 3.0 fast charging for two devices.
Type-C
- PD 100W
- 5V/5A, 9V/5A, 12V/5A, 15V/5, 20V/5A
USB-A
- QC 18W
- 5V/3A , 9V/2A, 12V/1.5A
Type-C + USB-A
- Total: 45W + 18W
30 Mins Fast Charging
*The actual data will be slightly different depending on the circumstances.
Jowua Armrest Organizer Compatible
Designed for Tesla
Premium Hybrid
Materials
Stylish design with zinc alloy housing and silicone cover.
Slim and
Compact Size
22.5mm diameter able to fit most cars.
Gold Plated
Contact
Reduce resistance and improve sensitivity.
LED
Indicator
Three colors indicate charging status.
White = 5V, Blue=9V/12V, Green=15V/20V
Mobile Office
Charge a laptop in your car
BEFORE
AFTER
