Přenosný kompresor pro Tesla & Sada ventilových čepiček na pneumatiky
Přenosný kompresor pro Tesla
- 60W nabíjení s vysokou rychlostí: Revolucionalizujte svůj zážitek z nabíjení s naším 60W kompresorem s vysokou rychlostí nabíjení. Dosáhněte plného nabití za pouhých 30 minut s přiloženým kabelem USB-C, což nabízí efektivitu až šestkrát rychlejší než standardní modely.
Rychlé nafouknutí, optimální výkon
- Zažijte 50% nárůst výkonu při nafukování s naším kompresorem. Nyní můžete nafouknout pneumatiky za polovinu obvyklého času, což zvyšuje efektivitu pro majitele Tesly.
Výkonný válec z odlévané slitiny
- Speciálně navrženo pro elektrická vozidla (EV), náš robustní válec z odlévané slitiny s důvěrou zvládá vysoké tlaky v pneumatikách, což zajišťuje spolehlivost a odolnost.
Velký displej
- Náš design s velkým displejem poskytuje intuitivní rozhraní, které zřetelně zobrazuje všechny funkce pro přátelské ovládání a monitorování.
Mnoho doplňků pro splnění všech vašich potřeb
- Tento komplexní balíček obsahuje odolné úložné pouzdro, adaptér pro jehlový ventil, adaptér pro Presta ventil a kabel typu C, což zajišťuje, že budete připraveni na jakoukoli situaci.
⚠️ Poznámky k bezpečnosti:
- Při nafukování se může vzduchová hadice zahřát kvůli provozu pod vysokým tlakem. Zacházejte s ní opatrně, abyste se vyhnuli popáleninám.
- Vyhněte se nepřetržitému provozu déle než 5 minut, aby nedošlo k přehřátí. Před manipulací se ujistěte, že kompresor a hadice jsou ochlazeny.
Víčka ventilů (sada 4 kusů)
- Perfektní těsnění proti úniku: Naše víčka obsahují integrovanou gumovou těsnění, která zajišťují vzduchotěsné, nepropustné a odolné proti prachu ochranu.
- Kompozitní materiály, chrání tělo ventilu: Vestavěné izolační materiály chrání vaše ventily před nečistotami, korozi a nepříznivým počasím.
- Materiály vysoké kvality pro trvanlivost a odolnost proti prachu: Vyrobena ze slitiny zinku, tyto víčka nabízejí výjimečnou pevnost a odolnost proti prachu.
- Snadná manipulace a instalace: Šestihranný design zajišťuje snadnou instalaci a demontáž, což tyto víčka činí uživatelsky přívětivými a praktickými.
Balení obsahuje
- Přenosný kompresor x1
- Přepravní taška x1
- Adaptér pro jehlový ventil x1
- Adaptér pro Presta ventil x1
- Kabel typu C x1
- Uživatelská příručka
Podívejte se na často kladené otázky: Objevte více o tomto nezbytném doplňku pro Teslu a udělejte první krok k efektivnějšímu a pohodlnějšímu zážitku z jízdy. Klikněte zde > Často kladené otázky k přenosnému kompresoru pro Teslu.
Vyberte možnosti
Use it on my TM3 highland to regulate pressure in tires, especially during winter season when the temperature fluctuates, the compressor helps set the exact pressure I want to achieve in each tire. Also easy to use for my bike and other items at home.
Good and convenient product
Convenient and reliable
I’ve been able to inflate 6 very low pressure tires with a not fully charged battery. Very impressed.
(On the “cons” side: a bit too noisy…)
All New Tire Inflating Experience
High-efficient Inflation │ Design for Evs
60W High-speed Charging
Support fast charging in just 30 minutes for a full charge. Save up to 6 times of the waiting time compare to others.
Fast Inflation & Optimum Performance
Enhanced inflation performance up to 50%, taking only half the time to inflate.
Alloy Die-cast Cylinder
No need to fear of high pressure loading with our powerful cylinder. Design for EV with high tire pressure requirements.
Fast Charge Fast Inflation Powerful Cylinder
60W High-speed Charging │Powered up, ready to go!
・Built-in lithium-ion battery. No need for
external power source,
go completely wireless.
・Support up to 60W fast charging and 30 min to
full power.
Save up to 6 times of the waiting
time compare to others.
・Type-C universal charging port is highly
compatible and convenient.
Note: The Jowua air pump supports 5-20V⎓3A (maximum 60W) fast charging. The battery charging time is dynamically adjusted based on the efficiency of the power supply. All data on this page have been tested under specific conditions, actual use may differ due to varying environments.
Powerful Motor
Optimum Performance
Reduce Inflation Time In Half !
Adopt high-speed permanent magnet motor with a 22mm high-precision alloy die-cast cylinder. It takes less than a minute* to refill a high-pressure tire.
Note: The inflated item is a 235/40 R19 car tire, inflated from 38 to 42 psi pressure approximately 55s.
This data is tested under specific conditions, due to different environments, the actual use process may be slightly different.
During the inflation process, high pressure operation may cause physical heating. Please do not use it continuously for more
than 5 minutes, and wait until it has cooled down. Be cautious when removing the air hose to prevent burns!
Electric Vehicles VS Traditional Car Tire
The maximum pressure for regular tire is the minimum for EVs
Electric vehicles are heavier than traditional vehicles due to their batteries and reinforced body structure. EVs require relatively high tire pressure to bear the weight. Take most of the Tesla models as example, the required tire pressure standard is 42psi/2.9bar, which is much higher than the traditional tire standard of 36psi/2.5bar.
Tire Pressure Requirment
Traditional 36psi /2.5bar
EV 42psi / 2.9bar
Inflation Time Comparison (from 32 to 42 PSI)
・Regular portable air pumps cannot handle the high pressure loading of electric vehicles due to the small-diameter cylinder design. Excessive pressure loading results in reduced efficiency and serious power consumption.
・Jowua adopts a large-diameter alloy die-cast. It is specifically designed to meet the high tire-pressure requirement of electric vehicles.
Electric Vehicles Mode
42 PSI by default. Press to inflate and automatically stops when the pre-set pressure is reached.
Effective Heat Dissipation
Multi-blade fans and cooling vent design for better air circulation and heat dissipation.
30 cm Extended Air Hose
Extended nylon-braided air hose, easily inflate from multiple angles.
Built-in LED Light
Easy to use in the dark ,
and long press for emergency SOS flashing.
Shockproof Case
Comes with a variety of adapters and accessories to meet all your needs.
Quick Connect Valve Adapter
Press to lock, pull to open,
fast and easy. Eliminating the time of tightening the air valve.
Large Screen Display
Display all features at once. Easy to read and operate.
Jowua Shockproof Storage Case
Easily store it on the side of the rear trunk.
Comes with a variety of adapters and accessories to meet all your needs.
Presta valve adapter
Ventil Adapter Set
Type-C charging cable
Storage Case
Low Tire Pressure?
Out of Battery Again?
Support Fast Charge & Quick Inflation Helps you get back on the road faster than ever.
Power up in a hurry
12 minutes 60W fast charging
Super-fast Inflation
Fully inflate all four tires from
38 to 42 psi within 6 minutes.
Note: This data is tested under specific conditions, due todifferent environments, the actual use process may beslightly different.
Note: During the inflation process, high pressure operationmay cause physical heating. Please do not use it continuouslyfor more than 5 minutes, and wait until it has cooled down.Be cautious when removing the air hose to prevent burns!
獨家設計 專為Model 3 & Y 量身打造
有兩種不同的頭枕造型
Model 3
頭枕上有兩縫線
Model Y
頭枕表面無縫線
Tire Valve Caps (Set of 4)
Durable Material
Dust Resistance
Easy
Installaion
Set of 4
Supreme Quality|Selected Material
High-Quality
Materials for Durability
and Dust Resistance
Crafted from zinc alloy for exceptional
strength, dustproof durability.
Integrated Rubber Design
Rubber seal for airtight, leak-proof,
and dust-resistant performance.
Composite Protection
Built-in insulation materials safeguard
your valves from dirt, corrosion, and harsh weather conditions.
Installation Guide
Step 1
Uncrew the original car valve and clean the valve core
Step 2
Align the JOWUA tire valve
Notice
Due to the built-in rubber of the valve caps, it's advised not to over-tighten during locking to avoid complications. And caused by weather-induced expansion and contraction of the valve.
Dedicated Design
Perfectly Match with Tesla
Hexagonal Shape Design
Easy installation and convenient removal.
Always effortless and user-friendly.
Let customers speak for us
from 261 reviewsThe 2 controllers work flawlessly with the hub. My kids are super happy to be able to play together and I am happy I don't have to give up the bluetooth slot for my phone!
Turned my Tesla into a gaming console on wheels. It's not just a gadget; it's your ticket to in-car entertainment nirvana. Sleek, ergonomic, and connects like magic to my Tesla (or other devices apparently). It keeps my kids fingers off my screen. The battery life is gaming Marathon-worthy too.
Jowua is excellent, high level of quality, reasonable prices. Easy to buy and track shipment. Delivery in 5 days max.
Good car floor liners provide superior protection against dirt, spills, and wear. Made from durable materials like rubber or thermoplastic, they fit snugly to the vehicle’s contours, ensuring easy installation and removal. Their non-slip surface enhances safety, while raised edges trap debris, keeping your car’s interior clean and looking new.
Connected the controllers with my TM3 Highland in less than 30 seconds. Costs half the price of a PS controller, takes up less space in the car, and lasts a long time on the battery. Really happy with the purchase!
With Model 3 Highland you can use both Jowua controllers at the same time as long as you use the dongle method. I could not get both controllers working simultaneously via Bluetooth. So this bundle that comes with the USB hub is perfect cuz you can plug in both dongles AND the upgraded 256gb SD card for Sentry footage. This is the perfect solution for gaming with 2 controllers at the same time!
Good workmanship, it is clear that the manufacturer really thought about the products, the drawers fit very well. I find the rear oxygen under the armrest to be one inconvenience, that it has to be removed so that I can get under it, but I understand that it could not be thought of otherwise. The lamp is great. I would like the drink holder with a smaller edge and at the same time with an edge, the question is whether it would not be worse functionality then
Love the wireless charging and being able to use it with multiple gaming consoles. Just need a version that matches the wood trim in my Model X and I’ll buy two more 😂
If you own a 3 seater Model X, you know how ridiculous the rear storage area is. Impossible to find a decent storage solution. These things are FANTASTIC. Excellent build quality and perfect size. Absolutely would recommend!
Does exactly what it says it does. Plus, it’s movable a huge plus.
It feel solid and very strong. I like the front that make me access to the stuff inside easily. Also perfect size for my car, I can basically place it at the rear trunk or under my seat which are all convenient for me. Thanks for beautiful design!
Thank you Jowua team for making this beauty for my car! Love the white space rocket! Feel like have a falcon 9 in my car. Premium! Matched with my interior 100%
Charging works well, the angle is great, and it looks stylish - we love it!
Best looking in the market and has a very good quality. The kids love them and no more waste of time while waiting in the car.
I work in my Tesla a lot. This adapter is very handy for that. It tops off my MacBook pro (M) and keeps it full. Best to use with the USB C to magsafe cable. When you have to charge more than 10% it can become a quite hot, which is normal ofcourse with an adapter this small.
Fast & Free delivery worldwide
Free delivery on orders over €120.
Orders are shipped at J+1 or J+2.
Satisfied or refunded
Satisfaction first! Return or exchange your Jowua purchase within 30 days.
Multi-Lingual Support
Support available through our WhatsApp chat or via email.
Secure payments
Certificate (SSL, AES-256, and PayPal). Your information is secure.